Product ID:BARE WIRE ER 80 S-D 2
MSDS Date:08/01/1990
FSC:3439
NIIN:01-284-5611
MSDS Number: BLZJC

NATIONAL WELDING ALLOYS,INC.DIV. OF NAT.TORCH TIP

1600 SOUTH CANAL STREET
PITTSBURGH, PA 15215
US

Emergency Phone: 412-781-4255/800-424-9300(CHEMTREC)

Info Phone: 412-781-4255

Cage: 0ACE2

NATIONAL WELDING ALLOYS INC

PITTSBURGH, PA 15215-2624 US

Telephone: 412-781-4255

Cage: 0ACE2

NICKEL (SARA III)

CAS: 7440-02-0

RTECS: QR5950000

Fraction By Weight: 0.15%

OSHA PEL 1 MG/M3

ACGIH TLV: 1 MG/M3; 9192

CARBON BLACK

CAS: 1333-86-4

RTECS: FF5800000

Fraction By Weight: .07-.12%

OSHA PEL 3.5 MG/M3

ACGIH TLV: 3.5 MG/M3; 9192

MANGANESE (SARA III)

CAS: 7439-96-5

RTECS: OO9275000

Fraction By Weight: 1.6-2.1%

OSHA PEL (C) 5 MG/M3 DUST

ACGIH TLV: 5 MG/M3 DUST 9293

MOLYBDENUM

CAS: 7439-98-7

RTECS: QA4680000

Fraction By Weight: 0.4-0.6%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3; 9293

PHOSPHOROUS (YELLOW) (SARA III)

CAS: 7723-14-0

RTECS: TH3500000

Fraction By Weight: 0.025%

OSHA PEL 0.1 MG/M3

ACGIH TLV: 0.1 MG/M3; 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

SILICON

CAS: 7440-21-3

RTECS: VW0400000

Fraction By Weight: 0.5-0.8%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

SULFUR

CAS: 7704-34-9

RTECS: WS4250000

Fraction By Weight: 0.025%

OSHA PEL 13.0 MG/M3 MFR

ACGIH TLV: 5.00 MG/M3 MFR

COPPER (SARA III)

CAS: 7440-50-8

RTECS: GL5325000

Fraction By Weight: 0.50%

OSHA PEL 0.1MG/M3 FUME/1 DUST

ACGIH TLV: 0.2MG/M3 FUME; 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

IRON OXIDE (BALANCE RANGES FROM 95.68 TO 96.73).

CAS: 1309-37-1

RTECS: NO7400000

Fraction By Weight: BALANCE

OSHA PEL 10 MG/M3 (FE)

ACGIH TLV: 5 MG/M3(FE),B2; 9293

LD50 LC50 Mixture:ORAL LD50 (RAT) IS UNKNOWN.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ACUTE-WELDING FUMES MAY CAUSE
DISCOMFORT,DIZZINESS,NAUSEA & DRYNESS/IRRITATION OF THE
THROAT.CHRONIC-WELDING FUMES,GASES/DUST MAY CAUSE PULMONARY
IRRITATION/PNEUMONITIS.IRON FUME MAY PRODUCE SIDEROSIS .NICKEL &
HEXAVALENT CHROMIUM HAVE BEENREPORTED TO BE CARCINOGENIC.
Explanation of Carcinogenicity:THIS MATERIAL CONTAINS NICKEL.
Effects of Overexposure:WELDING FUMES MAY CAUSE DISCOMFORT, DIZZINESS,
NAUSEA AND DRYNESS OR IRRITATION OF THE THROAT. FUMES, GASES OR
DUSTS MAY CAUSE PULMONARY IRRITATION OR PNEUMONITIS. IRON FUME MAY
PRODUCE SIDEROSIS. NIC KEL & HEXAVALENT CHROMIUM HAVE BEEN REPORTED
TO BE CARCINOGENIC.
Medical Cond Aggravated by Exposure:PERSONS WITH PRE-EXISTING
RESPIRATORY FUNCTION MAY BE MORE SUSCEPTIBLE TO THE EFFECTS OF THE
WELDING FUMES.

First Aid:GET MEDICAL CARE IF NEEDED.EYES:FLUSH WITH WATER FOR 15
MINUTES HOLDING EYELIDS OPEN.SKIN:WASH THOROUGHLY WITH SOAP &
WATER.INHALATION:REMOVE TO FRESH AIR.PROVIDE CPR IF
NEEDED.INGESTION:CALL A DOCTOR .

Flash Point:NONE
Extinguishing Media:THIS ALLOY IS NONCOMBUSTIBLE. TO EXTINGUISH A METAL
POWDER FIRE, USE DRY SAND, DRY GRAPHITE OR OTHER CLASS "D" POWDER.
Fire Fighting Procedures:WEAR FIRE FIGHTING PROTECTIVE EQUIPMENT AND A
FULL FACED SELF CONTAINED BREATHING APPARATUS. COOL FIRE EXPOSED
CONTAINERS WITH WATER SPRAY.
Unusual Fire/Explosion Hazard:NONE. IN CONTACT WITH ACIDS, HYDROGEN GAS
WILL BE FORMED WHICH IS FLAMMABLE AND EXPLOSIVE.

Spill Release Procedures:WEAR RESPIRATORY EQUIPMENT DURING CLEANUP. USE
EQUIPMENT THAT KEEPS MATERIAL FROM BECOMING AIRBORNE. TO MINIMIZE
DUST GENERATION I.E. WET MOP, HEPA VACUUM.

Handling and Storage Precautions:STORAGE-KEEP MATERIAL IN CLOSED
CONTAINERS AWAY FROM MOISTURE,STRONG OXIDIZERS & ACIDS.
Other Precautions:NO FOOD OR SMOKING IN WORK AREAS. WASH THOROUGHLY
AFTER HANDLING. AVOID BREATHING FUMES AND VAPORS. DO NOT GET IN
EYES, ON SKIN OR ON CLOTHING.

Respiratory Protection:USE RESPIRABLE FUME RESPIRATOR OR AIR SUPPLIED
RESPIRATOR WHEN WELDING, BRAZING OR SOLDERING IN CONFINED SPACE OR
WHERE LOCAL EXHAUST OR VENTILATION DOES NOT KEEP EXPOSURE BELOW
PEL, TLV OR STEL.
Ventilation:LOCAL EXHAUST AT THE ARC (OR FLAME), OR BOTH, TO KEEP THE
FUMES AND GASES BELOW PEL'S, TLV'S OR STEL'S IN BREATHING ZONE
Protective Gloves:WELDER'S GLOVE
Eye Protection:PROTECTIVE FACE SHIELD
Other Protective Equipment:EYE WASH STATION, APRONS, HATS, ARM &
SHOULDER PROTECTION, AS WELL AS DARK SUBSTANTIAL CLOTHING.
Work Hygienic Practices:WEAR HEAD AND BODY PROTECTION WHICH HELP TO
PREVENT INJURY FROM RADIATION, SPARKS AND ELECTRICAL SHOCK.
Supplemental Safety and Health

HCC:N1
Solubility in Water:INSOLUBLE
Appearance and Odor:SOLID WIRE OR ROD, GREY TO COPPER IN COLOR

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS AND ACIDS
Stability Condition to Avoid:FLAMES
Hazardous Decomposition Products:METAL OXIDES. DECOMPOSITION PRODUCTS
INCLUDE THOSE ORIGINIATING FROM INGREDIENTS + THOSE FROM THE BASE
METAL & COATING.

Waste Disposal Methods:PREVENT WASTE FROM CONTAMINATING SURROUNDING
ENVIRONMENT. DISCARD ANY PRODUCT, RESIDUE, DISPOSABLE CONTAINER OR
LINER IN AN ENVIRONMENTALLY ACCEPTABLE MANNER, IN FULL COMPLIANCE
WITH FEDERAL, STATE AN D LOCAL REGULATIONS

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.